400 Watt Crane Type Mould Laser Welding Machine for Mold Repairing
Introduction of machine:
Laser is an abbreviation for "Optical Amplification of Stimulated Radiation". This technique produces a beam of intensely focused heat rays that can be added to similar or different alloys. The laser welding process can be completed quickly. (Usually in children), and will not cause scars or blemishes on the welding surface. In fact, through the indirect method of adjusting the laser, a laser welding machine can be used to achieve a surface treatment close to polishing. Because there are very few contaminants generated at the welding point, few users can easily weld the most complex and complicated processing methods of 0.1 mm, polished surfaces and can form components.
Nowadays, the tool and mold workshops that use laser welding machines tend to be able to produce quality products based on their wide range of applications and extended periods of use of materials, while eliminating excessive heat effects.
Advantages and features:
- High accuracy , the welding spot diameter is only 0.2mm-0.5mm
- Little affect area , no distortion of the processing parts.
- No effect for etch after welding , low oxidation rate ,the color of the processing parts is intact .
- No stomata or sand hole disappeared after welding.
- Can process at the welding point , especially applicable to repairing mound requiring polishing.
- The processing parts can reach 50-60 rockwell hardness.
Product parameters:
| Model | ML-WY-M02 |
| Average laser power | 400W |
| Max energy of single pulse | 15J |
| Laser wavelength | 1064nm |
| Pulse width | 0-20ms |
| Laser welding frequency | 0.5 -100HZ |
| Spot size range | 0.2-2mm |
| Welding wire | 0.1-0.8mm |
| Power Supply | 380VAC ± 10% / 50-60HZ |
| Power Consumption | 12 KW |
| Water pressure protection | ≤ 0.025MPa |
| Cooling water temperature | ≤ 35 degrees |
| Temperature protection | 45 degrees |
| Cooling water flow | 10L/min |
| Dimensional | 1000mm x 600mm x 1500mm |
| Weight | 560kg |
| Cooling Way | Water cooling |
| Laser Type | Pulse |
| Hazard Class | 4 Class |
Applied area and materials:
Repair cracks, collapsed horn, touched edge and damaged sealing side, welding on horniness material (~HRC60). This machine’s arm could be move up and down, front and backwards, left and right side.
Samples for reference:
FAQ
1. How is the payment?
- 30% deposit before production and the balance 70% before shipment
2. How is the delivery and shipment?
- Ship in 7 days after 100% payment;
- Plywood box packaging
3. How will you guarantee aftersales services?
- We offer two warranty for laser source, one year for whole machine and lifetime maintenance services.
- Engineers available to service machinery overseas
- Free technical training in our factory
- Free sample can be sent to you
- Professional technical team 24 hours online
4. How about your presales service?
- Speeding offer within 8 hours quick response and free consulting.
- Free sample welding or testing is available
- Progressing solution design to all clients, including distributors and end users.
